JS7 JobScheduler

Space shortcuts

Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Introduction

  • The connections from Controllers to Agents can be secured by HTTPS.
  • This article describes the steps required to set up secure HTTPS communication from a Controller to an Agent. This includes to use a standalone Controller or a Controller cluster with a primary and standby instance.

Prerequisites

  • Certificate stores can be managed from the command line and by use of tools that provide a GUI for this purpose:
    • the Java keytool is available from the Java JRE or JDK,
    • the Keystore Explorer is an open source utility to graphically manage certificate stores. 

Certificate Management

Private keys and public certificates should be distributed as follows:



Explanation:

  • Keystore and truststore in orange color are required for any connections of a Controller to an Agent.
    • The Agent's private key and certificate for Server Authentication are added to the Agent's keystore. In case of a self-signed certificate the certificate is added to the Controller's truststore too.
    • This step can be skipped if a CA-signed certificate is used as the Root Certificate in the Controller's truststore is sufficient to verify Agent certificates.
  • Keystore and truststore in green color are required if mutual authentication is in place for certificate based client authentication (default).

Secure Connection Setup

In the following the placeholder JS7_CONTROLLER_CONFIG_DIR specifies the configuration directory of the Controller. The placeholders JS7_AGENT_HOME, JS7_AGENT_CONFIG_DIR specify the directories where the Agent is installed and configured.

  • JS7_CONTROLLER_CONFIG_DIR is the Controller's configuration directory that is specified during installation:
    • /var/sos-berlin.com/js7/controller/config (default on Unix)
    • C:\ProgramData\sos-berlin.com\js7\controller\config (default on Windows)
  • JS7_AGENT_HOME is the installation path that is specified during the JobScheduler Agent installation:
    • /opt/sos-berlin.com/js7/agent (default on Unix)
    • C:\Program Files\sos-berlin.com\js7\agent (default on Windows)
  • JS7_AGENT_CONFIG_DIR is the Agent's configuration directory that is specified during Agent installation:
    • /var/sos-berlin.com/js7/agent/config (default on Unix)
    • C:\ProgramData\sos-berlin.com\js7\agent\config (default on Windows)

Secure Connections from Controller to Agent

This configuration is applied in order to secure the connection if the Controller and Agent are not operated on the same server and network interface.

Secure connections require authentication.

For the complete list of related configuration items see JS7 - Agent Configuration Items

The following chapters assume mutual authentication to be in place.

Step 1: Create the Agent Keystore

  • On the Agent server create the keystore using the keytool from your Java JRE or JKD. Alternatively import a private key and certificate that you received from your certificate authority:
    • For use with a third party utility create a keystore, e.g. https-keystore.p12, in PKCS12 format and import:
      • Agent private key and certificate for Server Authentication
      • Root CA certificate
      • Intermediate CA certificates
    • For use with keytool create the keystore with the private key and certificate for Server Authentication from the command line. The below examples suggest one possible approach for certificate management, however, there may be other ways how to achieve similar results.

      • Example for use of private key and CA-signed certificate with a PKCS12 store:

        Example how to add a private key and CA-signed certificate to a PKCS12 keystore
        # should your Agent's private key and certificate be provided with a .jks keystore (keypair.jks) then temporarily convert the keystore to pkcs12 (keystore.p12)
#   for later use with openssl, assuming the alias name of the Agent private key is "agent-https"
# keytool -importkeystore -srckeystore keypair.jks -destkeystore keystore.p12 -deststoretype PKCS12 -srcalias agent-https

# assuming your Agent's private key from a pkcs12 keystore (keystore.p12), store the Agent's private key to a .key file in PEM format (agent-https.key)
openssl pkcs12 -in keystore.p12 -nocerts -out agent-https.key

# concatenate CA root certificate and CA intermediate certificate to a single CA Bundle certificate file (ca-bundle.crt)
cat RootCACertificate.crt > ca-bundle.crt
cat CACertificate.crt >> ca-bundle.crt

# Export Agent's private key (agent-https.key), Agent's certificate (agent-https.crt) and CA Bundle (ca-bundle.crt) in PEM format to a new keystore (https-keystore.p12)
#   assume the fully qualified hostname (FQDN) of the Agent server being agent.example.com
openssl pkcs12 -export -in agent-https.crt -inkey agent-https.key -chain -CAfile ca-bundle.crt -name agent.example.com -out JS7_AGENT_CONFIG_DIR/private/https-keystore.p12

# should you require use of a .jks keystore type then convert the pkcs12 keystore assuming the alias name of the Agent's private key being "agent-https"
# keytool -importkeystore -srckeystore agent-https.p12 -srcstoretype PKCS12 -destkeystore JS7_AGENT_CONFIG_DIR/private/https-keystore.jks -deststoretype JKS -srcalias agent-https

      • Example for use of private key and self-signed certificate with a PKCS12 keystore:

        Example how to generate a private key and self-signed certificate for import into a PKCS12 keystore 
        # generate the Agent's private key with alias name "agent-https" and certificate in a keystore (https-keystore.p12)
#   use the fully qualified hostname (FQDN) and name of your organization for the distinguished name
keytool -genkey -alias "agent-https" -dname "CN=hostname,O=organization" -validity 1461 -keyalg RSA -keysize 2048 -keypass jobscheduler -keystore "JS7_AGENT_CONFIG_DIR/private/https-keystore.p12" -storepass jobscheduler -storetype PKCS12

      • Example for use of private key and self-signed certificate with JKS keystore:

        Example how to generate a private key and self-signed certificate for import into a JKS keystore 
        # generate Agent's private key with alias name "agent-https" and certificate in a keystore (https-keystore.jks)
#   use the fully qualified hostname (FQDN) and name of your organization for the distinguished name
keytool -genkey -alias "agent-https" -dname "CN=hostname,O=organization" -validity 1461 -keyalg RSA -keysize 2048 -keypass jobscheduler -keystore "JS7_AGENT_CONFIG_DIR/private/https-keystore.jks" -storepass jobscheduler

      • Explanation:

        • The -dname option specifies the certificate issuer, therefore use your own set of CN, O, OU, DC that specify the issuer's distinguished name. The O setting is required for the issuer.
        • The -keypass option accepts the password that you will need later on to manage your private key.
        • The -keystore option specifies the location of the keystore file. The keystore file should be in reach of the Agent, it is recommended to use the sub-folder private in the JS7_AGENT_CONFIG_DIR directory.
        • The -storepass option specifies the password for access to the keystore file.
        • The -storetype option is used to specify the PKCS12 or JKS keystore format.
    • With the keystore being set up specify respective properties with the JS7_AGENT_CONFIG_DIR/private/private.conf configuration file:

      • Example

        Example for private.conf file specifying the Agent keystore
        js7 {
    web {
        # keystore and truststore locations for https connections
        https {
            keystore {
                # Default: ${js7.config-directory}"/private/https-keystore.p12"
                file=${js7.config-directory}"/private/https-keystore.p12"
                key-password="jobscheduler"
                store-password="jobscheduler"
            }
        }
    }


        Explanation:
        • js7.web.https.keystore.file is used for the path to the keystore.
        • js7.web.https.keystore.key-password is used for access to the private key.
        • js7.web.https.keystore.store-password is used for access to the keystore

Step 2: Set up Authentication for Agent

  • By default mutual authentication is in place.
    • The Controller is challenged by the Agent to present its Client Authentication certificate that is verified by the Agent.
    • If a Controller cluster is used then connections from both Controller instances are authenticated by the distinguished name of the instance's Client Authentication certificate.

  • The JS7_CONTROLLER_CONFIG_DIR/private/private.conf configuration file should include authentication details like this:

    Example for private.conf file specifying Controller authentication
    js7 {
    auth {
        users {
            # Controller ID for connections by primary/standby Controller instance
            jobscheduler {
                distinguished-names=[
                    "DNQ=SOS CA, CN=apmacwin_primary_client, OU=IT, O=SOS, L=Berlin, ST=Berlin, C=DE",
                    "DNQ=SOS CA, CN=apmacwin_secondary_client, OU=IT, O=SOS, L=Berlin, ST=Berlin, C=DE"
                ]
            }
        }
    }
}


    Explanation:
    • The jobscheduler user account is an example for a Controller ID that is specified during Controller installation.
    • For each Controller instance the distinguished name as available from its Client Authentication certificate's subject is used.

Step 3: Set up the Agent Instance Start Script for HTTPS

  • To make an Agent use HTTPS the respective port setting has to be specified with the Agent's Instance Start Script.

    • For Unix the Instance Start Script is available from JS7_AGENT_HOME/bin/agent_<port>.sh:

      Example for HTTP and HTTPS port settings with Agent Instance Start Script for Linux
      # Sets the http port for the JS7 Agent.
# Without this setting the default port 4445 is used.
# If just a port is specified then the JS7 Agent listens to all
# available network interfaces. This corresponds to 0.0.0.0:<port>.
# Use the form <ip address or hostname>:<port> to indicate
# a specific network interface the JS7 Agent should listen to.
# The command line option --http-port beats the environment
# variable JS7_AGENT_HTTP_PORT.

JS7_AGENT_HTTP_PORT=localhost:4445


# In addition to the http port an https port for the
# JS7 Agent can be specified. If just a port is specified
# then the JS7 Agent listens to all available network interfaces.
# This corresponds to using 0.0.0.0:<port>.
# Use the form <ip address or hostname>:<port> to indicate
# a specific network interface the JS7 Agent should listen to.
# The command line option --https-port beats the environment
# variable JS7_AGENT_HTTPS_PORT.

JS7_AGENT_HTTPS_PORT=apmacwin:4445

    • For Windows the Instance Start Script is available from JS7_AGENT_HOME\bin\agent_<port>.cmd:

      Example for HTTP and HTTPS port settings with Agent Instance Start Script for Windows 
      rem # Sets the http port for the JS7 Agent.
rem # Without this setting the default port 4445 is used.
rem # If just a port is specified then the JS7 Agent listens to all
rem # available network interfaces. This corresponds to 0.0.0.0:<port>.
rem # Use the form <ip address or hostname>:<port> to indicate
rem # a specific network interface the JS7 Agent should listen to.
rem # The command line option --http-port beats the environment
rem # variable JS7_AGENT_HTTP_PORT.

set JS7_AGENT_HTTP_PORT=localhost:4445


rem # In addition to the http port an https port for the
rem # JS7 Agent can be specified. If just a port is specified
rem # then the JS7 Agent listens to all available network interfaces.
rem # This corresponds to using 0.0.0.0:<port>.
rem # Use the form <ip address or hostname>:<port> to indicate
rem # a specific network interface the JS7 Agent should listen to.
rem # The command line option --https-port beats the environment
rem # variable JS7_AGENT_HTTPS_PORT.

set JS7_AGENT_HTTPS_PORT=apmacwin:4445


      Explanation:
      • The HTTP port is required but is limited to the localhost network interface with the localhost prefix.
      • The HTTPS port is specified with the hostname prefix that indicates the network interface.

Step 4: Configure the Controller Truststore

The Controller truststore is added the Root CA certificate. If self-signed certificates are used then each certificate is added to the Controller's truststore.

  • On the Controller server create the truststore using the keytool from your Java JRE or JDK or some third party utility.
    • For use with a third party utility create a truststore, e.g. https-truststore.p12, in PKCS12 format and import:
      • Root CA certificate
    • For use with keytool create the truststore in PKCS12 or JKS format with the Root CA certificate. The below examples suggest one possible approach for certificate management, however, there may be other ways how to achieve similar results.

      • Example for import of a Root CA certificate to a PKCS12 truststore:

        Example how to import a CA-signed certificate into a PKCS12 Truststore
        # import Root CA certificate in PEM format to a PKCS12 truststore (https-truststore.p12)
keytool -import -alias "root-ca" -file "RootCACertificate.crt" -keystore "JS7_CONTROLLER_CONFIG_DIR/private/https-truststore.p12"

      • Example for use of a self-signed Controller certificate with a PKCS12 truststore:

        Example for import of a self-signed Controller certificate the Master public certificate to JOC Cockpit PKCS12 Truststore 
        # on Agent server: export Agent's certificate from keystore (https-keystore.p12) identified by its alias name (agent-https) to a file in PEM format (agent-https.crt)
keytool -exportcert -rfc -noprompt -file "agent-https.crt" -alias "agent-https" -keystore "JS7_AGENT_CONFIG_DIR/private/https-keystore.p12" -storepass jobscheduler -storetype PKCS12

# on Controller server: import the Agent's certificate from a file in PEM format (agent-https.crt) identified by its alias name (agent-https) to the Controller's PKCS12 truststore (https-truststore.p12)
keytool -importcert -noprompt -file "agent-https.crt" -alias "agent-https" -keystore "JS7_CONTROLLER_CONFIG_DIR/private/https-truststore.p12" -storepass jobscheduler -storetype PKCS12 -trustcacerts

      • Example for use of a self-signed Controller certificate with a JKS truststore:

        Example for import of a self-signed Controller certificate the Master public certificate to JOC Cockpit JKS Truststore 
        # on Agent server: export Agent's certificate from keystore (https-keystore.jks) identified by its alias name (agent-https) to a file in PEM format (agent-https.crt)
keytool -exportcert -rfc -noprompt -file "agent-https.crt" -alias "agent-https" -keystore "JS7_AGENT_CONFIG_DIR/private/https-keystore.jks" -storepass jobscheduler -storetype JKS

# import the Agent's certificate from a file in PEM format (agent-https.crt) identified by its alias name (agent-https) to the Controller's JKS truststore (https-truststore.jks)
keytool -importcert -noprompt -file "agent-https.crt" -alias "agent-https" -keystore "JS7_CONTROLLER_CONFIG_DIR/private/https-truststore.jks" -storepass jobscheduler -trustcacerts
  • On the Controller server specify the location of the truststore with the JS7_CONTROLLER_CONFIG_DIR/private/private.conf configuration file:

    • Example

      Example for private.conf file specifying the Controller truststore
      js7 {
    web {
        # keystore and truststore locations for https connections
        https {
            truststores=[
                {
                    # Default: ${js7.config-directory}"/private/https-truststore.p12"
                    file=${js7.config-directory}"/private/https-truststore.p12"
                    store-password=jobscheduler
                }
            ]
        }
    }


      Explanation:
      • js7.web.https.truststores.file is used for the path to the truststore.
      • js7.web.https.truststores.store-password is used for access to the truststore.

Mutual Authentication for Agent

This configuration is applied in order to enable mutual authentication

  • from the Controller to the Agent:
    • the Controller verifies the Agent's certificate for Server Authentication
    • the Agent verifies the Controller's certificate for Client Authentication
  • from pairing Controller instances.

Step 1: Create/Update Controller (Client) Keystore

For mutual authentication the Controller has to hold a Client Authentication private key and certificate in its keystore.

  • This can be simplified by use of a private key/certificate pair that is created for both extended key usages Server Authentication and Client Authentication. In this case a single private key and certificate is stored with the Controller's keystore as indicated with the JS7 - Controller HTTPS Connections article.
  • If separate private key/certificate pairs should be used for Server Authentication and Client Authentication purposes then use of separate certificate stores for the Controller is recommended:
    • The keystore holds the private key/certificate for Server Authentication.
    • The client keystore holds the private key/certificate for Client Authentication.

The following steps are applied if a separate client keystore is used with a Controller.

  • On the Controller server create the client keystore using the keytool from your Java JRE or JDK or some third party utility.
    • For use with a third party utility create a client keystore, e.g. https-client-keystore.p12, in PKCS12 format and import:
      • Controller private key and certificate for Client Authentication
      • Root CA certificate
      • Intermediate CA certificates
    • For use with keytool create the client keystore in PKCS12 or JKS format according to the steps indicated with JS7 - Controller HTTPS Connections: Step 1: Create Controller Keystore chapter.
      • Apply the indicated steps to the client keystore and use the private key/certificate pair for Client Authentication.

  • The location of the client keystore is added to the JS7_CONTROLLER_CONFIG_DIR/private/private.conf configuration file like this:

    • Example for PKCS12 client keystore:

      Example how to specify the client keystore location with private.conf file
      js7 {
    web {
        # keystore and truststore location for https connections
        https {
            client-keystore {
                # Default: ${js7.config-directory}"/private/https-client-keystore.p12"
                file=${js7.config-directory}"/private/https-client-keystore.p12"
                key-password=jobscheduler
                store-password=jobscheduler
            }
    }
}

Step 2: Create Agent Truststore

  • On the Agent server create the truststore using the keytool from your Java JRE or JDK or some third party utility.
    • For use with a third party utility create a truststore, e.g. https-truststore.p12, in PKCS12 format and import:
      • Root CA certificate
    • For use with keytool create the truststore in PKCS12 or JKS format with the Root CA certificate. The below examples suggest one possible approach for certificate management, however, there may be other ways how to achieve similar results.

      • Example for import of a Root CA certificate to a PKCS12 truststore:

        Example how to import a CA-signed certificate into a PKCS12 truststore
        # on Agent server: import Root CA certificate in PEM format to a PKCS12 truststore (https-truststore.p12)
keytool -import -alias "root-ca" -file "RootCACertificate.crt" -keystore "JS7_AGENT_CONFIG_DIR/private/https-truststore.p12" -storetype PKCS12

      • Example for export/import of self-signed client authentication certificate to a PKCS12 keystore:

        Example how to export/import a self-signed certificate to a PKCS12 truststore 
        # on Controller server: export Controller's certificate from client keystore (https-client-keystore.p12) identified by its alias name (controller-client-https) to a file in PEM format (controller-client-https.crt)
keytool -exportcert -rfc -noprompt -file "controller-client-https.crt" -alias "controller-client-https" -keystore "JS7_CONTROLLER_CONFIG_DIR/private/https-client-keystore.p12" -storepass jobscheduler -storetype PKCS12

# on Agent server: import Controller's certificate in PEM format to a PKCS12 truststore (https-truststore.p12)
keytool -import -alias "controller-client-https" -file "controller-client-https.crt" -keystore "JS7_AGENT_CONFIG_DIR/private/https-truststore.p12" -storetype PKCS12

      • Example for export/import of self-signed client authentication certificate to a JKS keystore:

        Example how to export/import a self-signed certificate to a JKS truststore 
        # on Controller server: export Controller's certificate from client keystore (https-client-keystore.jks) identified by its alias name (controller-client-https) to a file in PEM format (controller-client-https.crt)
keytool -exportcert -rfc -noprompt -file "controller-client-https.crt" -alias "controller-client-https" -keystore "JS7_CONTROLLER_CONFIG_DIR/private/https-client-keystore.jks" -storepass jobscheduler

# on Agent server: import Controller's certificate in PEM format to a JKS truststore (https-truststore.jks)
keytool -import -alias "controller-client-https" -file "controller-client-https.crt" -keystore "JS7_AGENT_CONFIG_DIR/private/https-truststore.jks" -storetype JKS

Notes

  • A restart of the respective component is required to apply modifications to .the JS7_AGENT_CONFIG_DIR/private/private.conf file of the Agent and JS7_CONTROLLER_CONFIG_DIR/private/private.conf file of the Controller respectively.

Further Resources


  • No labels