You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

WORK IN PROGRESS!

Introduction

Consider the situation where files with different categories(i.e. files with similar characteristics such as type, source, or similar) can be processed in parallel but all the files of any one category have to be processed sequentially.

For example, the centralised data processing of a company receives stock movement reports from subsidiaries at regular intervals. Whilst the reports from different subsidiaries can be processed simultaneously, the reports from each subsidiary have to be processed sequentially.

The 'Best Practice' Solution

Our recommended approach for this situation would be:

Warning: : syntax error in line 1 near '\'
  • Use a single 'load_file' File Order Source directory to which all files are delivered.
  • JobScheduler would use regular expressions to identify the files arriving in this directory on the basis of their names, timestamps or file extensions and forward them for processing accordingly.
  • JobScheduler would then set a 'lock' for the subsidiary whose file is being processed to prevent further files from this subsidiary being processed as long as processing continues.
     Should a 'new' file from this subsidiary arrive whilst its predecessor is being processed, the job 'receiving' the new file will be 'set back' by JobScheduler as long as the lock for the subsidiary is set.
    
  • This lock would be released by JobScheduler once processing of the 'first' file has been completed.
  • The job 'receiving' the new file will now be able to forward the new file for processing.

The Solution in Detail

  • JS starts as soon as file matching with Regular Expression found in the directory.
     This directory is set in the "File Order Sources" area in the "Steps/Nodes" view of the "load_files" job chain. 
     TODO: SCREENSHOT
    
  • JobScheduler's aquire_lock job matches files using regular expressions and determines the file's category - for example, Berlin or Munich.
     The regular expressions are also defined in the "File Order Sources" area shown in the screenshot.
     Note that the regular expressions match the prefixes "a" and "b" in the file names and not directly "Berlin" or "Munich".
     The aquire_lock job uses a Rhino JavaScript to try to aquire the lock and wait if the lock is not available. This script is listed below.
    
function spooler_process() \{
    
 try \{

     var parameters = spooler_task.order().params();
     var filePath = "" + String(parameters.value("scheduler_file_path"));
     spooler_log.info( " scheduler_file_path : " + filePath );

 //

     var param1 = "" + String(parameters.value("param1"));
     spooler_log.info( " param1 : " + param1 );

 //

     var fileParts = filePath.split("\\");
     var fileName  = fileParts[fileParts.length-1];
     spooler_log.info( "fileName : " + fileName );

     if(fileName.match("^a[A-Za-z0-9_]*\.csv$")) \{
        var lockName = "BERLIN_PROC";
        var lock_name = "BERLIN_PROC";
        spooler_log.info( "File matched with berlin lock_name : "+ lockName  );
     \}
    
     if(fileName.match("^b[A-Za-z0-9_]*\.csv$")) \{
        var lockName = "MUNICH_PROC";
        spooler_log.info( "File matched with berlin lock_name : "+ lockName  );
     \}

     spooler_task.order().params().set_value("file_spec",fileName);
     spooler_task.order().params().set_value("lock_name",lockName);      
         
     if (!spooler.locks().lock_or_null( lockName )) \{
         var lock = spooler.locks().create_lock();
         lock.set_name( lockName );     
         spooler.locks().add_lock( lock );     
         if (spooler_task.try_hold_lock( lockName )) \{          
             return true;
         \} else \{
           spooler_task.call_me_again_when_locks_available();
         \}
    \} else \{      
      spooler_task.order().setback();
      spooler_log.info( " lock is already aquired , lock_name : "+ lockName +" , setback , will retry after some time");      
    \}

    return true;

  \} catch (e) \{
   
    spooler_log.warn("error occurred    : " + String(e));
    return false;

  \}

\}
  • Once aquire_lock finds the matching category it will try to set a semaphore (flag) using JobScheduler's inbuilt LOCK mechanism
  • Only one instance of each LOCK is allowed as can be seen in the screenshot below. Once a LOCK has been assigned to first file of a category (either Berlin or Munich), next file for this category has to wait with a setback until the LOCK is free.
    TODO - ADD SCREENSHOT
  • The same mechanism will be repeated for files from other categories. As long as a file of any given category is not being processed and therefore the corresponding LOCK not been set, the way will be free for the file from the other category to be allowed to be processed.
  • Once process is finished depending upon success or error, JobScheduler will move the file from the in folder to either the done (on success) or failed(on error) folders.
  • After moving input file to correct target directory JobScheduler, the release_lock job will be called, which will remove the lock/semaphore from JobScheduler and allow the next file from same category to be processed.
function spooler_process() \{

  try \{

     var parameters = spooler_task.order().params();
    
     var filePath = "" + String(parameters.value("scheduler_file_path"));
     spooler_log.info( " scheduler_file_path : " + filePath );
     var lockName = "" + String(parameters.value( "lock_name" ));
     spooler_log.info( "  lock_name : " +  lockName );

/*
     var fileParts = filePath.split("\\");
     var fileName  = fileParts[fileParts.length-1];
     spooler_log.info( "fileName : " + fileName );

     if(fileName.match("^a[A-Za-z0-9_]*\.csv$")) \{
        var lockName = "BERLIN_PROC";
        var lock_name = "BERLIN_PROC";
        spooler_log.info( "File matched with berlin lock_name : "+ lockName  );
     \}
    
     if(fileName.match("^b[A-Za-z0-9_]*\.csv$")) \{
        var lockName = "MUNICH_PROC";
        spooler_log.info( "File matched with berlin lock_name : "+ lockName  );
     \}
*/
     if (spooler.locks().lock_or_null( lockName )) \{
        spooler.locks().lock( lockName ).remove();
     \}
     return true;

  \} catch (e) \{

    spooler_log.warn("error occurred: " + String(e));
    return false;

  \}

\}
  • A force-release_lock job is also required for the situation that the processing of a job fails without the corresponding lock being released.
     The script for this job to release the 'Berlin' lock would look something like:
    
function spooler_process() \{

  try \{

    var lock_name = "BERLIN_PROC";
   
      spooler.locks().lock(lock_name).remove();
   
    return true;

  \} catch (e) \{

    spooler_log.warn("error occurred: " + String(e));
    return false;

  \}

\}

Limitations of this solution

  • The limitation of this approach will become apparent if more than one file should arrive from a subsidary at once.
     This is because there is no guarantee that files arriving together will be processed in any given order.
     This situation typically occurs after an unplanned loss of a file transfer connection. After the connection has been restored, there is a) no guarantee that the files arriving as a batch will be written to the file systen in a particular order b) no way for JobScheduler to know how many files will arrive as a batch. 
    
  • One solution here would be to wait until a steady state in the incoming directory has been reached (i.e. no new file has been added and the size of all files remains constant over a suitable period of time) before starting to identify files. JobScheduler could then order files according to their names before forwarding them for processing.
     The downside of this second approach is that it brings a delay in starting processing with it, due to the need wait to check whether all members of a batch of files has arrived by checking for a steady state.
    

Solution Demo

A demonstration of this solution is available for download from:

Demo Installation

  • Unpack the zip file to a local directory
  • Copy the 'SQLLoaderProc' folder to your JobScheduler 'live' folder.
     ...
    
  • Copy the 'Data' folder to the a suitable local location.
     The default location for this folder, which is specified in the configurations in the demo jobs, is:
     {{C:\sandbox}}
     Note that the following paths have to be modified if the location of the 'Data' folder is changed:
    
  • The 'load_files' File Order Source directories in the load_files.job_chain.xml job chain object
  • the 'source_file' and 'target_file' paths specified as parameters in the move_file_suc.job.xml and move_file_error.job.xml objects

Running the demo

  • Just copy files from the 'Data/__test-files' folder to the 'in' folder, JobScheduler will automatically start processing within a few seconds.

How does the Demo Work?

The demo job chain ('load_files') is shown in the diagram to the right.

 Note that the secondary job chain shown on the right of the diagram is only relevant of an error occurs.

The 'Folderin_a' and 'Folderin_a' symbols represent the 'File Order Source' directory monitored by the job chain.

  • JobScheduler starts as soon as file matching with Regular Expression found in in directory.
  • JobScheduler's aquire_lock job matches file with regular expression and decide file's category i.e. Berlin or Munich.
  • Once aquire_lock finds the matching category its try to set an Semaphore (Flag) using JobScheduler's inbuilt LOCK mechanism
  • There is only onc instance on LOCK is allowed or once LOCK is assigned to first file of Berlin category, next file has to wait or setback until the LOCK is free.
  • THe same mechanism will be repeated for files from category Munich but since the LOCK is not acquired ( or Semaphore (Flag)) is not set for Munich, file from category Munich will be allowed to be processed.
  • Once process is finished depending upon success or error , JS will move the file from the 'in' folder to either the 'done' (on success) or 'failed' (on error).
  • After moving input file to correct target directory JobScheduler job release_lock will be called which will remove the lock/Semaphore from JS and next file from same category will be allowed.

Graphical Representation of the Solution

Warning: : syntax error in line 1 near '\'

See also:

  • No labels