Product Knowledge Base

Space shortcuts

Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Scope

  • The Universal Agent is frequently running in the system account or a service account and will execute jobs within the context and permission of this account.
  • Running a job as a different user includes to login as that user, optionally load the user profile and execute commands in this context.
  • This article applies to the Universal Agent for Windows only. For Unix environments there is no need for scheduler based user switching as the built-in sudo and su capabilities provide this functionality.

Introduction

  • For user switching the Agent has to be operated for a user account or service account, not for the system account.
  • The credentials of the target user for which a job should be executed are not stored with JobScheduler configuration data. Instead the user account that runs the JobScheduler Windows Service stores credentials with the Windows Credential Manager. When a job should be executed then the JobScheduler Agent reads the credentials from the Windows Credential Manager. Reading credentials that have previously been stored using the same account works without the need to specify a password. Therefore the solution is free from use of passwords.
  • A login is performed with the target user credentials and the user's environment is active when executing the job.

 

  • User switching applies to
    • All job types (standalone jobs and job chain jobs)
    • Shell Jobs
    • API jobs in any of the supported languages
    • Pre-processing and post-processing Monitors

Credential Manager

The Windows Credential Manager is accessible via its

  • Graphical User Interface  
  • Command Line Interface: cmdkey
  • API: the API is used by the JobScheduler Agent

Manage credentials with the Graphical User Interface

  • Open the Credential Manager GUI from the JobScheduler Agent account.
    • English: Control Panel -> Credential Manager
    • German: Systemsteuerung -> Anmeldeinformationsverwaltung
  • Select the Credential Type Windows Authentication -> Generic
    • Add a generic credential information for a target user with the following input fields: 
      • Intenet or network address
        • For use with JobScheduler this field holds the "target name" of the credentials. 
        • You are free to use any characters to specify a unique identifier for the credentials.
      • User name
        • The account for the target user can be specified by Unicode characters and digits including space, comma,  _, -, \ and @
        • For domain users specify the user principal name (UPN) in the format username@DOMAIN
          • The format DOMAIN\username is not supported
      • Password

Manage credentials with the Command Line Interface

  • Open a Windows console window (cmd.exe) for the JobScheduler Agent account.

  • Use the following commands to add credentials for a target user:

    # Add credentials for a local user
cmdkey /generic:run_as_jobuser /user:jobuser /pass:password
 
# Add credentials for a domain user
cmdkey /generic:run_as_jobuser /user:jobuser@DOMAIN /pass:password
 
 
# Show all credentials
cmdkey /list

Permissions

Permissions are required for the JobScheduler Agent account and for the target user of a job.

  • To manage permissions switch to 
    • English:Control panel -> Administrative Tools -> Local Security Policy -> Local Policies -> User Rights Assignment
    • German: Systemsteuerung -> Verwaltung -> Lokale Sicherheitsrichlinie -> Lokale Richtlinien -> Zuweisen von Benutzerrechten
  •  Right-click a permission and use the Properties -> Add user or group action.

 

Privilege Constants.

Account Rights Constants

Permissions for the Agent Account

  • SE_ASSIGNPRIMARYTOKEN_NAME
    • English: Replace a process-level token
    • German: Ersetzen eines Tokens auf Prozessebene
  • SE_INCREASE_QUOTA_NAME
    • English: Adjust memory quotas for a process 
    • German: Anpassen von Speicherkontingenten für einen Prozess

Load target user profile

If the profile of the target user should be loaded then the Agent account requires the Administrator role, see LoadUserProfile, and permissions:

  • SE_BACKUP_NAME
    • English: Back up files and directories 
    • German: Sichern von Dateien und Verzeichnissen
  • SE_RESTORE_NAME
    • English: Restore files and directories
    • German: Wiederherstellen von Dateien und Verzeichnissen

Hints

Restart the JobScheduler Agent Windows Service in order to apply changes to roles and permissions.

Permissions for Target User

  • SE_BATCH_LOGON_NAME
    • English: Log on as a batch job 
    • German: Anmelden als Stapelverarbeitungsauftrag

 

Error Messages

System Error Codes

Credential Manager

English WINDOWS-1168
Windows Credential Manager does not return an entry named 'MyCredentialsKey': WINDOWS-1168 (CredRead) Element not found.
German WINDOWS-1168 
Windows Credential Manager does not return an entry named 'MyCredentialsKey': WINDOWS-1168 (CredRead) Element nicht gefunden.

 

icacls

English
COM-80020009 java.lang.RuntimeException: Windows command failed: C:\Windows\System32\icacls.exe => JOBUSER: No mapping between account names and security IDs was done.
German 
COM-80020009 java.lang.RuntimeException: Windows command failed: C:\Windows\System32\icacls.exe => JOBUSER: Zuordnungen von Kontennamen und Sicherheitskennungen wurden nicht durchgeführt.

A wrong name has been used for the user account with the Credential Manager. You can use the runas command line utility  to check valid user names.

 

LogonUser

English WINDOWS-1326
WINDOWS-1326 (LogonUser) Logon failure: The user name or password is incorrect.
German WINDOWS-1326 
WINDOWS-1326 (LogonUser) Anmeldung fehlgeschlagen: unbekannter Benutzername oder falsches Kennwort.

Job-User Credentials im Creadentials Store sind falsch.

Eigentlich es kann nur das Kennwort falsch sein, weil im Schritt davor (icacls) der Benutzername bereits akzeptiert wurde (icacls wirft eine Exception, wenn der Benutzername nicht bekannt ist).

Oder man verwendet bei einem Domain Benutzer die falsche Syntax DOMAIN\username statt username@DOMAIN - icacls kann mit DOMAIN\username umgehen, JobScheduler LogonUsernicht (nur username@DOMAIN).

Prüfen z.B. mit runas oder CMD als dieser Benutzer ausführen

 

English WINDOWS-1385
WINDOWS-1385 (LogonUser) Logon failure: the user has not been granted the requested logon type at this computer.
German WINDOWS-1385 
WINDOWS-1385 (LogonUser) Anmeldung fehlgeschlagen: Der Benutzer besitzt nicht den benötigten Anmeldetyp auf diesem Computer.

 

Dem Job-User fehlt das Recht Log on as a batch job (Anmelden als Stapelverarbeitungsauftrag)

 

LoadUserProfile

 

English WINDOWS-1314
WINDOWS-1314 (LoadUserProfile)  A required privilege is not held by the client.
German WINDOWS-1314 
WINDOWS-1314 (LoadUserProfile) Dem Client fehlt ein erforderliches Recht.

 

Dem Agent-User fehlen folgende Rechte:

  • Back up files and directories (Sichern von Dateien und Verzeichnissen)
  • Restore files and directories (Wiederherstellen von Dateien und Verzeichnissen)

 

 

English WINDOWS-5
WINDOWS-5 (LoadUserProfile) Access is denied
German WINDOWS-5 
WINDOWS-5 (LoadUserProfile) Zugriff verweigert

 

Agent-User ist kein Administrator

API-Job stderr

jobscheduler_agent_<port>.log (Access is denied)
[info]   SCHEDULER-726  Task runs on remote scheduler http://localhost:5445
[info]   SCHEDULER-918  state=starting (at=2017-08-02 15:00:47.803+0200)
[info]   [stderr] log4j:ERROR setFile(null,true) call failed.
[info]   [stderr] java.io.FileNotFoundException: <agent_data>\logs\jobscheduler_agent_<port>.log (Access is denied)
[info]   [stderr]     at java.io.FileOutputStream.open0(Native Method)
[info]   [stderr]     at java.io.FileOutputStream.open(Unknown Source)
[info]   [stderr]     at java.io.FileOutputStream.<init>(Unknown Source)
[info]   [stderr]     at java.io.FileOutputStream.<init>(Unknown Source)
[info]   [stderr]     at org.apache.log4j.FileAppender.setFile(FileAppender.java:294)
[info]   [stderr]     at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:165)
[info]   [stderr]     at org.apache.log4j.DailyRollingFileAppender.activateOptions(DailyRollingFileAppender.java:223)
[info]   [stderr]     at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:307)
[info]   [stderr]     at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:295)
[info]   [stderr]     at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:176)
[info]   [stderr]     at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:191)
[info]   [stderr]     at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:523)
[info]   [stderr]     at org.apache.log4j.xml.DOMConfigurator.parseCategory(DOMConfigurator.java:436)
[info]   [stderr]     at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:1004)
[info]   [stderr]     at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:872)
[info]   [stderr]     at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:778)
[info]   [stderr]     at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:483)
[info]   [stderr]     at org.apache.log4j.LogManager.<clinit>(LogManager.java:127)
[info]   [stderr]     at org.slf4j.impl.Log4jLoggerFactory.getLogger(Log4jLoggerFactory.java:64)
[info]   [stderr]     at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:285)
[info]   [stderr]     at com.sos.scheduler.engine.common.scalautil.Logger$.apply(Logger.scala:104)
[info]   [stderr]     at com.sos.scheduler.engine.taskserver.TaskServerMain$.<init>(TaskServerMain.scala:22)
[info]   [stderr]     at com.sos.scheduler.engine.taskserver.TaskServerMain$.<clinit>(TaskServerMain.scala)
[info]   [stderr]     at com.sos.scheduler.engine.taskserver.TaskServerMain.main(TaskServerMain.scala)
[info]   [stderr] log4j:ERROR Either File or DatePattern options are not set for appender [file].

jobscheduler_agent_<port>.log - die Berechtigungen für den Job-User müssen für diese Datei manuell gesetzt werden (Lesen, Schreiben)

 

 


  • No labels