JS7 JobScheduler

Space shortcuts

Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Next »

Introduction

Initial Operation is performed after installation of the JS7 Controller, Agent and the JOC Cockpit.

Operation of a Controller Cluster is subject to the agreements of the JS7 - License.

  • Use of Standalone Controllers:
  • Use of Controller Clusters:
    • available to commercial license holders,

For a Controller Cluster, initial operation includes:

  • applying the license key and licensed binary code.
  • registering the Controller Cluster and Agents.

Prerequisites

Initial Operation requires that a JS7 Controller, Agent and JOC Cockpit have been successfully installed and are up and running.

Controller Cluster Checks

Checking the Controller ID

Both Controller instances in a cluster have to be installed with the same Controller ID, which is a unique identifier for the Controller Cluster. Users can modify the Controller Instance Start Script containing the JS7_CONTROLLER_ID=<controller-id> environment variable.

Changing the Controller ID requires reinstallation of the Controller instances by carrying out the following steps for each instance:

  • Stop the Controller service:
    • Unix, Windows: Stop the Controller instance from the command line as described in the JS7 - Controller - Command Line Operation article.
    • Windows: Stop the Controller instance from the Windows service panel. 
  • Remove the Controller journal files:
    • The journal files have to be removed from the configuration directory with the state sub-directory. This means that any orders, which have been submitted for workflows will be removed and that workflows will have to be redeployed:
      • Unix: rm -f /var/sos-berlin.com/js7/controller/state/*
      • Windows: del C:\ProgramData\sos-berlin.com\js7\controller\state\*
    • Note that a different location for the configuration directory can be specified during installation.
  • Modify the Controller ID:
  • Restart the Controller instance.

Checking the Cluster Settings

The Secondary Controller has to use the following configuration from its JS7_CONTROLLER_DATA/config/controller.conf file - see JS7 - Controller Configuration Items for more information.

    js7.journal.cluster.node.is-backup=yes

If changes to the above configuration are required then users can carry out the following steps for the Secondary Controller instance:

  • Stop the Controller service:
    • Unix, Windows: Stop the Controller instance from the command line as described in the JS7 - Controller - Command Line Operation article.
    • Windows: Stop the Controller instance from the Windows service panel. 
  • Remove Controller journal files:
    • The journal files have to be removed from the configuration directory with the state sub-directory. Any orders that have been submitted for workflows will be removed and workflows have to be redeployed:
      • Unix: rm -f /var/sos-berlin.com/js7/controller/state/*
      • Windows: del C:\ProgramData\sos-berlin.com\js7\controller\state\*
    • A different location for the configuration directory can be specified during installation.
  • Modify the the config/controller.conf file to reflect the js7.journal.cluster.node.is-backup=yes setting.
  • Restart the Controller instance.

Adding License Key and Licensed Binary Code

Customers holding a commercial license receive a license key from SOS and can download the binary code that allows clustering of JS7 components - see the JS7 - Download article for more information.

The steps required are summarized below, for details see the JS7 - How to apply a JS7 License Key article.

Handling for Installation on premises

The following chapters can be skipped if a license key was added when using the Windows installer for the Controller. However, the steps described are required when a license key for an existing installation is to be added or replaced without updating the Controller.

Adding a License Key

  • The license key can be added during installation of a Controller instance and a JOC Cockpit instance.
  • The license key can be added later on by saving the license certificate file in the following locations:
    • Unix: Controller configuration directory with license sub-directory.
      • Default location: /var/sos-berlin.com/js7/controller/config/license
      • A different location for the configuration directory can be specified during installation.
    • Windows: Controller Configuration Directory with license sub-directory.
      • Default location: C:\ProgramData\sos-berlin.com\js7\controller\<controller-id>\config\license
        • where <controller-id> is the unique identifier for the Controller that is specified during installation.
      • A different location for the configuration directory can be specified during installation.

Adding Licensed Binary Code

  • Binary code for clustering is available from the js7-license.jar file, which can be obtained from JS7 - Download.
  • By downloading the binary code for clustering users consent with the license terms for a commercial license of JS7.
  • The js7-license.jar file has to be stored to the following location:
    • Unix: Controller installation directory with lib/user_lib sub-directory:
      • Default location: /opt/sos-berlin.com/js7/controller/lib/user_lib
      • A different location for the installation directory can be specified during installation.
    • Windows: Controller installation Directory with lib\user_lib sub-directory:
      • Default location: C:\Program Files\sos-berlin.com\js7\controller\lib\user_lib
      • A different location for the installation directory can be specified during installation.

Handling for Docker® Installation

Basically the same locations for license key and licensed binary code apply as explained for Unix operating systems in previous sections of this article.

Note: No access to the container's file system is available before the container is running, which makes it impossible to add or replace licensed binary code before the Controller has been started.

Adding a License Key

  • The license key is added by storing the license certificate file in the following location:

Adding Licensed Binary Code

  • Binary code for clustering is available from the js7-license.jar file, which can be obtained from the JS7 - Download page.
  • By downloading the binary code for clustering, users consent with the license terms for a commercial license of JS7.
  • The js7-license.jar file has to be stored in the following location:
    • /var/sos-berlin.com/js7/controller/config/lib
    • The /var/sos-berlin.com/js7/controller directory is typically mounted from a Docker var volume when running the container: for details see JS7 - Controller Installation for Docker Containers.
    • If the config/libdsub-directory does not exist then you can create it before saving the js7-license.jar file.

On start-up the Controller checks the above directory for the existence of the js7-license.jar file. If the file is found then:

  • the file will be copied to /opt/sos-berlin.com/js7/controller/lib/user_lib
  • any existing version of the file in this directory will be overwritten.

Initial Operation

Login to JOC Cockpit User Interface

Users can navigate with their browser to the JOC Cockpit URL and enter the User Account and Password. Typically the URL will include the hostname and port that JOC Cockpit has been installed with:

  • For example, http://myhost:4446. Check that the JOC Cockpit port is accessible. This might require additional firewall rules to allow access to the port from the computer that the user's browser is operated on.

  • After initial installation of the JOC Cockpit the default user account root and password root are available.

Note: The root user account is assigned the all role in the default configuration and is granted all available permissions. For details see the JS7 - Identity Services and JS7 - Authentication articles.

Note: JOC Cockpit might take a number of seconds to start and to display the login window.


Register Controller and Agents

After successful logging in to the JOC Cockpit a dialog window for registering a Controller is displayed. Users will find the same dialog later on via the Manage Controllers/Agents view.

Users have a choice of registering a Standalone Controller (within scope of the Open Source License) or a Controller Cluster for high-availability (within scope of the JS7 Commercial License, see JS7 - License).

Register Controller Cluster

A Controller Cluster implements high-availability for automated fail-over should a server node operating the Controller instance become unavailable.


This dialog allows the Primary Controller instance, the Secondary Controller instance and an Agent Cluster Watcher to be specified.

Explanation

  • Title: The title added for each Controller instance is displayed in the JS7 - Dashboard view.
  • URL for JOC Cockpit: Primary and Secondary Controller instances are accessed from the JOC Cockpit using this URL.
    • The URL includes the protocol, hostname and port that the relevant Controller instance is operated with.
    • By default the HTTP protocol is used. The HTTPS protocol can be used if TLS/SSL certificates are in place, see the JS7 - Controller HTTPS Connections article.
  • URL for Secondary / URL for Primary: The Primary Controller establishes a connection to the Secondary Controller and vice versa.
    • Input to this field is not required if the URL for a Controller instance is the same across the network.
    • Input to this field is required should Proxy Services be involved that make use of specific URLs.
  • Cluster Watcher: An Agent is required for operation of a Controller Cluster. The Agent is contacted by both Controller Cluster members to verify the cluster status should a direct connection between Controller Cluster members not be available.
    • Agent ID: The Agent is assigned a unique identifier. Uniqueness is applied for all Agents registered with the same Controller. The Agent ID cannot be modified during the lifetime of an Agent. Changes to the Agent ID require the Agent to be removed and re-added with JOC Cockpit.
    • Agent Name: The name of an Agent is used for example when assigning the Agent to jobs. Similarly to the Agent ID the Agent Name has to be unique but can be changed later on.
    • Agent URL: The protocol HTTP or HTTPS, host name or IP address and port by which the Agent is accessible to the Controller.

Note: The following connections should be accessible and might require additional firewall rules to allow access to the relevant ports:

  • JOC Cockpit connection
    • to the Primary Controller's host and port.
    • to the Secondary Controller's host and port.
  • Primary Controller connection
    • to the Secondary Controller's host and port.
    • to the Cluster Watcher and any additional Agent's host and port.
  • Secondary Controller connection
    • to the Primary Controller's host and port.
    • to the Cluster Watcher and any additional Agent's host and port.

For more information about network connections see JS7 - System Architecture.

Register Agents

After the connection between JOC Cockpit and the Controller is established users can add Agents.
The  icon in the JOC Cockpit main menu allows the Manage Controllers/Agents view to be selected:


To add a Standalone Agent users can start from the Controller's action menu which can be used to add the Agent:


This opens the following popup window:


Explanation:

  • Agent ID: A unique identifier of the Agent. Uniqueness is applied for all Agents registered with the same Controller. This identifier cannot be changed later on.
  • Agent Name: The name of an Agent is used, for example, when assigning the Agent to jobs. Similarly to the Agent ID, the Agent Name has to be unique but can be changed later on.
  • Title: An individual description which can be searched for.
  • URL: The HTTP or HTTPS protocol, host name or IP address and port with which the Agent can be accessed from the Controller.

Further References



  • No labels