JS7 JobScheduler

Space shortcuts

Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Introduction

  • Connections from user browsers to JOC Cockpit can be secured by HTTPS with TLS/SSL certificates.
  • Connections from clients using the JS7 - REST Web Service API (that ships with JOC Cockpit) can be secured by HTTPS with TLS/SSL certificates.
  • This article describes the steps required to set up secure HTTPS communication with JOC Cockpit. This includes to set up a standalone JOC Cockpit instance or a JOC Cockpit cluster with a number of instances.

Prerequisites

  • Certificate stores can be managed from the command line and by use of tools that provide a GUI for this purpose:
    • the Java Keytool is available from the Java JRE or JDK,
    • the Keystore Explorer is an open source utility to graphically manage certificate stores. 

Certificate Management

To secure access to JOC Cockpit by clients (user browsers or REST API clients) the following keys and certificates should be in place:



Explanation:

  • Keystore and truststore in orange color are required for any connections of clients to JOC Cockpit.
  • Keystore and truststore in green color are required if mutual authentication is in place, e.g. to allow certificate based authentication.
  • A JOC Cockpit truststore in green color is required should secure connections be used to access a Controller or an LDAP server for authentication/authorization. It is therefore recommended to set up the JOC Cockpit truststore.
  • Consider that similar distribution of private keys and certificates applies if a JOC Cockpit cluster with a number of instances is used.

Secure Connection Setup

In the following the placeholders JOC_HOME, JETTY_HOME and JETTY_BASE are used which locate three directories. If you install Jetty with the JOC Cockpit installer then

  • JOC_HOME is the installation path that is specified during JOC Cockpit installation:
  • JETTY_HOME = JOC_HOME/jetty
  • JETTY_BASE is Jetty's base directory that is specified during JOC Cockpit installation:

Secure Connections from Clients to JOC Cockpit

This configuration is applied in order to enable clients (user browser, REST API client) to access the JOC Cockpit by use of HTTPS.

Step 1: Add HTTPS module to Jetty

  • On the JOC Cockpit server run the following command and replace the JETTY_HOME and JETTY_BASE placeholders as specified above:

    Add HTTPS module to Jetty
    java -jar "JETTY_HOME/start.jar" -Djetty.home="JETTY_HOME" -Djetty.base="JETTY_BASE" --add-to-start=https
  • Having executed the above command you should find a new folder JETTY_BASE/etc

    • By default Jetty expects a keystore with the name keystore in this folder that is created from the above command.

    • Jetty doesn't start if it doesn't find a keystore that corresponds to its settings.

  • In addition a number of entries in the JETTY_BASE/start.ini configuration file for TLS/SSL settings such as the HTTPS port are added.

Step 2: Create JOC Cockpit Keystore

  • On the JOC Cockpit server create the keystore using the keytool from your Java JRE or JDK or some third party utility.
    • For use with a third party utility create a keystore, e.g. https-keystore.p12, in PKCS12 format and import:
      • JOC Cockpit private key and certificate for Server Authentication
      • Root CA certificate
      • Intermediate CA certificates
    • For use with keytool generate the keystore in PKCS12 or JKS format with the private key and certificate for JOC Cockpit Server Authentication. The below examples suggest one possible approach for certificate management, however, there may be other ways how to achieve similar results.

      • Example for import of private key and CA-signed certificate to a PKCS12 keystore:

        Example how to add a private key and CA-signed certificate to a PKCS12 keystore
        # should the JOC Cockpit's private key and certificate be provided with a .jks keystore (keypair.jks) then temporarily convert the keystore to pkcs12 (keystore.p12)
#   for later use with openssl, assuming the alias name of the JOC Cockpit private key being "joc-https"
# keytool -importkeystore -srckeystore keypair.jks -srcstoretype JKS -destkeystore keystore.p12 -deststoretype PKCS12 -srcalias joc-https

# assuming your JOC Cockpit private key from a pkcs12 keystore (keystore.p12), store the JOC Cockpit private key to a .key file in PEM format (joc-https.key)
openssl pkcs12 -in keystore.p12 -nocerts -out joc-https.key

# concatenate CA Root certificate and CA Intermediate certificates to a single CA Bundle certificate file (ca-bundle.crt)
cat RootCACertificate.crt > ca-bundle.crt
cat CACertificate.crt >> ca-bundle.crt

# Export JOC Cockpit private key (joc-https.key), JOC Cockpit certificate (joc-https.crt) and CA Bundle (ca-bundle.crt) in PEM format to a new keystore (https-keystore.p12)
#   assume the fully qualified hostname (FQDN) of the JOC Cockpit server being "joc.example.com"
openssl pkcs12 -export -in joc-https.crt -inkey joc-https.key -chain -CAfile ca-bundle.crt -name joc.example.com -out "JETTY_BASE/resources/joc/https-keystore.p12"

# should you require use of a .jks keystore type then convert the pkcs12 keystore assuming the alias name of the JOC Cockpit private key being "joc-https"
# keytool -importkeystore -srckeystore https-keystore.p12 -srcstoretype PKCS12 -destkeystore https-keystore.jks -deststoretype JKS -srcalias joc-https

      • Example for use of private key and self-signed certificate with a PKCS12 keystore:

        Example how to generate a private key and self-signed certificate for import into a PKCS12 keystore 
        # generate JOC Cockpit's private key with alias name "joc-https" and certificate in a keystore (https-keystore.p12)
#   use the fully qualified hostname (FQDN) and name of your organization for the distinguished name
#   consider that PKCS12 keystores require to use the same key password and store password
keytool -genkey -alias "joc-https" -dname "CN=hostname,O=organization" -validity 1461 -keyalg RSA -keysize 2048 -keypass jobscheduler -keystore "JETTY_BASE/resources/joc/https-keystore.p12" -storepass jobscheduler -storetype PKCS12

      • Example for use of private key and self-signed certificate with a JKS keystore:

        Example how to generate a private key and self-signed certificate for import into a JKS keystore 
        # generate JOC Cockpit's private key with alias name "joc-https" and certificate in a keystore (https-keystore.jks)
#   use the fully qualified hostname (FQDN) and name of your organization for the distinguished name
keytool -genkey -alias "joc-https" -dname "CN=hostname,O=organization" -validity 1461 -keyalg RSA -keysize 2048 -keypass jobscheduler -keystore "JETTY_BASE/resources/joc/https-keystore.jks" -storepass jobscheduler -storetype JKS

      • Explanation:

        • The -dname option specifies the certificate issuer, therefore use your own set of CN, OU, DC that specify the issuer's distinguished name. The O setting is required for the issuer.
        • The -keypass option accepts the password that you will need later on to manage your private key. 
        • The -keystore option specifies the location of the keystore file.
        • The -storepass option specifies the password for access to the keystore file.
        • The -storetype option is used to specify the PKCS12 or JKS keystore format.
  • Alternatively apply a private key and certificate that are issued by your certificate authority or a trusted authority.

Step 3: Configure Jetty

See below chapter Mutual Authentication for Clients and JOC Cockpit Step 2: Configure Jetty for configuration of the truststore with JETTY_BASE/start.ini.

  • Edit the following entries in the JETTY_BASE/start.ini configuration file use of the keystore:

    Example hot to set the keystore location with the start.ini file
    ## Keystore file path (relative to $jetty.base)
jetty.sslContext.keyStorePath=resources/joc/https-keystore.p12

## Keystore password
jetty.sslContext.keyStorePassword=jobscheduler

## KeyManager password (same as keystore password for pkcs12 keystore type)
jetty.sslContext.keyManagerPassword=jobscheduler


    Explanation:

    • Specify the location of the keystore with the keyStorePath setting. A location relative to the JETTY_BASE directory can be specified.
    • Specify the password for your keystore with the keyStorePassword setting.
    • The password specified with the keyManagerPassword setting is used for access to your private key. The same password as for the keyStorePassword setting has to be used for a PKCS12 keystore type.

  • Specify the HTTPS port with the following entry of the JETTY_BASE/start.ini configuration file (default HTTPS port is 48446):

    Example how to set the port for the HTTPS protocol with the start.ini file
    ## Connector port to listen on
jetty.ssl.port=48446

Step 4: Deactivate HTTP Access

To deactivate HTTP access add a comment to the following module directive in your JETTY_BASE/start.ini configuration file like this:

Example how to deactivate the HTTP protocol with the start.ini file
# Module: http
# --module=http

Mutual Authentication for Clients and JOC Cockpit

This configuration is applied in order to enable mutual authentication:

  • the client verifies the JOC Cockpit certificate for Server Authentication
  • the JOC Cockpit verifies the client certificate for Client Authentication

Step 1: Create JOC Cockpit Truststore

  • On the JOC Cockpit server create the truststore using the keytool from your Java JRE or JDK or some third party utility.
    • For use with a third party utility create a truststore, e.g. https-truststore.p12, in PKCS12 format and import:
      • Root CA certificate
    • For use with keytool create the truststore in PKCS12 or JKS format with the Root CA certificate. The below examples suggest one possible approach for certificate management, however, there may be other ways how to achieve similar results.

      • Example for import of a Root CA certificate to a PKCS12 truststore:

        Example how to import a CA-signed certificate to a PKCS12 truststore
        # import Root CA certificate in PEM format to a PKCS12 truststore (https-truststore.p12)
keytool -import -alias "root-ca" -file "RootCACertificate.crt" -keystore "JETTY_BASE/resources/joc/https-truststore.p12" -storetype PKCS12

      • Example for import of a Root CA certificate to a JKS truststore:

        Example how to import a CA-signed certificate to a JKS truststore 
        # import Root CA certificate in PEM format to a JKS truststore (https-truststore.jks)
keytool -import -alias "root-ca" -file "RootCACertificate.crt" -keystore "JETTY_BASE/resources/joc/https-truststore.jks" -storetype JKS

Step 2: Configure Jetty

See above chapter Secure Connections from Clients to JOC Cockpit Step 3: Configure Jetty for configuration of the truststore with JETTY_BASE/start.ini.

  • Edit the following entries in the JETTY_BASE/start.ini configuration file for the truststore location:

    Example how to configure the truststore location with the start.ini file
    ## Truststore file path (relative to $jetty.base)
jetty.sslContext.trustStorePath=resources/joc/https-truststore.p12

## Truststore password
jetty.sslContext.trustStorePassword=jobscheduler


    Explanation:

    • Specify the location of the truststore with the trustStorePath setting. A location relative to the JETTY_BASE directory can be specified.
    • Specify the password for access to the truststore with the trustStorePassword setting.

  • Specify the settings to enforce client authentication with the following entries in the JETTY_BASE/start.ini configuration file: 

    Example how to enforce client authentication with the start.ini file
    ## force use of client authentication certificates
jetty.sslContext.needClientAuth=false
jetty.sslContext.wantClientAuth=true
jetty.sslContext.endpointIdentificationAlgorithm=

    Explanation:

Risk Mitigation

The above explanations indicate use of a Root CA certificate for verification of Client Authentication certificates when it comes to mutual authentication.

  • In fact use of a Root CA certificate allows any clients that dispose of a Client Authentication certificate signed by the same Root CA certificate or Intermediate CA certificates to be authenticated. This implication might allow an unwanted number of clients to access JOC Cockpit.
  • Coping strategies include
    • to use a separate certificate authority to sign Client Authentication certificates for access to JOC Cockpit.
    • to import individual Client Authentication certificates to the JOC Cockpit truststore instead of using a Root CA certificate.

Notes

  • A restart of JOC Cockpit is required to apply modifications to the JOC Cockpit JETTY_BASE/start.ini and JETTY_BASE/resources/joc/joc.properties configuration files .

Further Resources



  • No labels