Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents
outlinh1. true
outlinh1. true
1printablefalse
2stylh1. none
3indent20px

To trigger a job or an order on a remote JobScheduler you need have to open the configured JobScheduler port at the remote side (port 4455 in the example below) and ports 59999 and lower at the client side:

...

The maximum number of remote processes that can run in parallel should be considered when setting the range of the ports to be opened below 59999. It is also important to consider that operating systems generally take around two minutes before they finally release a port and allow it to be used to make create a new TCP connection to be made. .

 

Graphviz
digraph { width="800";
  client [label="Client JobScheduler"];
  remote [label="Remote JobScheduler"];
  client box client [ label = "OP: Select an outgoing port (given by OS).", textbgcolour="#ff7f7f" ];
  client box client [ label = "IP: Select an incomming port (<=59999)", textbgcolour="#ff7f7f" ];
  client => remote [ label = "TCP connection from OP to host:port from process_class.", linecolour="#800000" ];
  client >> remote [ label = "Send the IP port to receive the answer.", linecolour="silver" ];
  client >> remote [ label = "Send command to start the remote job.", linecolour="silver" ];
  client  box client [label="Waiting for response", textbgcolour="#7f7fff",  textcolour="#FFFFFF"];
  remote => remote [ label = "Start a separate process for the task." ];
  remote box remote [ label = "OPR: Select an outgoing port (given by OS).", textbgcolour="#ff7f7f" ];
  client <= remote [ label = "TCP connection from OPR to OP", linecolour="#800000" ];
  client << remote [ label = "Confirm the start of the task.", linecolour="silver" ];
  client  box client [label="Waiting for end of task.", textbgcolour="#7f7fff",  textcolour="#FFFFFF"];
  remote box remote [label="Execute the task.", textbgcolour="#7fff7f"];
  client << remote [ label = "Confirm the end of the task.", linecolour="silver" ];
}

 

<mscgen>
// Remote configuration
msc {

No Format
  width1. "800";

client label"Client JobScheduler",remote labeh1. "Remote JobScheduler";

No Format
   client box client [label "OP: Select an outgoing port (given by OS).", textbgcolouh1. "#ff7f7f"];
  client box client [label "IP: Select an incomming port (h1. 59999)", textbgcolour"#ff7f7f"];
  clienth1. > remote [label "TCP connection from OP to host:port from process_class.", linecolouh1. "#800000"];
  client >> remote [label "Send the IP port to receive the answer.", linecolouh1. "silver"];
  client >> remote [label "Send command to start the remote job.", linecolouh1. "silver"];
  client  box client [label"Waiting for response", textbgcolouh1. "#7f7fff",  textcolour"#FFFFFF"];
  remoteh1. > remote [label "Start a separate process for the task."];
  remote box remote [labelh1. "OPR: Select an outgoing port (given by OS).", textbgcolour"#ff7f7f"];
  client h1. remote [label "TCP connection from OPR to OP", linecolouh1. "#800000"];
  client << remote [label "Confirm the start of the task.", linecolouh1. "silver"];
  client  box client [label"Waiting for end of task.", textbgcolouh1. "#7f7fff",  textcolour"#FFFFFF"];
  remote box remote [labeh1. "Execute the task.", textbgcolour"#7fff7f"];
  client << remote [labelh1. "Confirm the end of the task.", linecolour"silver"];

...